Description

Metro
Material: .063″” (1.8mm) high-strength, natural-finish aluminum, with brushed exterior surfaces. .188″” (4.8mm) chassis• Top & Bottom: Brake-formed from flat sheet into box-shaped section.
• Sides & Back: Brake-formed from flat sheet stock, with smooth, unobstructed interior walls for complete air circulation.• Door: Extruded aluminum frame with full-length clear window double hinged; extruded aluminum full-length handle; continuous gasket; dual magnetic latches with transport latch. Door is field reversible• Tray Slide Racks: Model 4: Nickel-chrome plated wire;3″” (76mm) slide spacing. Model 8: Custom-designed aluminum extrusions with 1″” x 11⁄2″” x 1⁄8″” (25 x 38 x 3mm) angle uprights and 11⁄2″” x 1⁄2″” x .063″” (38 x 12 x 1.8mm) channel slides. All slide racks remove for thorough cleaning• Casters: Two B5DN on back — 5″” (127mm) double ball bearing swivel,
ball bearing axle, nickel-plated, donut neoprene-tired, pre-lubricated, bolted through chassis. Two B5DNB on front — same as above, with wheel brake• Electrical: PM2X675 Proofing Module
— 1350 watt, 120 VAC, 12 amp, 60 cycle, separate adjustable temperature and humidity thermostats with separate
indicator lights. Cabinet operating range is 80° – 120° Fahrenheit under
normal room temperature conditions. Water pan; continuous blower; perforated air duct at back; master switch and “Power On” light; 6-foot (1829mm), 3-wire lead cord with NEMA 5-15P straight male plug. Entire unit may be removed without tools, UL
Needs cleaned